Dell Openmanage sous Proxmox

De $1

 

 howto05_small.pngInstallation des tools Dell Openmanage sous Proxmox

 

echo 'deb http://linux.dell.com/repo/community/ubuntu wheezy openmanage' | tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list  
gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F

gpg -a --export 1285491434D8786F | apt-key add -

apt-get update

apt-get install srvadmin-all

 

service dataeng start

service dsm_om_connsvc start

update-rc.d dsm_om_connsvc defaults

 

L'interface Web : https://Adresse_IP_Proxmox:1311

 

Installation/Upgrade:

1.  (Optional for Upgrade) Create a new file ending in 'sources.list' in the '/etc/apt/sources.list.d' directory. Cut and paste the command below. (If typing by hand, note carefully the spacing.)

echo 'deb http://linux.dell.com/repo/community/deb/latest /' | sudo tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list

2.  To verify OMSA packages, add the repository key to apt. Note that you must re-do this step if upgrading from OMSA 6.5 because a new key is being used.

gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F

gpg -a --export 1285491434D8786F | sudo apt-key add -

3.  Make apt aware of the new software repository by issuing the following command:

sudo apt-get update

4.  Install one of the following selection of meta-packages to install the OMSA functionality you require:

srvadmin-all:Install all OMSA components

srvadmin-base:Install only base OMSA, no web server

srvadmin-rac4:Install components to manage the Dell Remote Access Card 4

srvadmin-rac5:Install components to manage the Dell Remote Access Card 5

srvadmin-idrac:Install components to manage iDRAC

srvadmin-idrac7:Install components to manage iDRAC7

srvadmin-webserver:Install Web Interface

srvadmin-storageservices:Install RAID Management

For example, to install all of OMSA: sudo apt-get install srvadmin-all

If you are upgrading, you must use apt-get install or apt-get dist-upgrade. Do not use apt-get upgrade, as doing so will not upgrade all the necessary packages.

 

CLI:

dataeng service starts automatically at reboot. If you want to manually start the service, issue the command below.

  1. sudo service dataeng start

  2. Now, you can use omreportomconfig, and omhelp commands.

  3. For example, you can issue omreport system summary to get details about your system.

  4. You can use omconfig to configure component properties.

  5. omhelp provides help information for commands.

  6. See OpenManage CLI User's Guide for comprehensive documentation.

 

Web Interface:

To use web interface, users with appropriate permissions need to be added.

     1.  Add users with appropriate permissions to /opt/dell/srvadmin/etc/omarolemap file. See detailed information in the User's Guide.

         Example:john_doe     *     Administrator

     2.  Start the web server.

         sudo service dsm_om_connsvc start

     3.  Go to https://<ip_address>:1311/ in your browser to access OMSA.

     4.  If you want to start dsm_om_connvsc service at boot, issue sudo update-rc.d dsm_om_connsvc defaults command.

 

Removal

Uninstall all packages: sudo apt-get --auto-remove remove srvadmin-all

Uninstall all packages including config files: sudo apt-get --auto-remove purge srvadmin-all

 

Debian Wheezy

Installer au préalable libssl 0.9.8 (non prise en charge sous Wheezy)

wget http://ftp.fr.debian.org/debian/pool/main/o/openssl/libssl0.9.8_0.9.8o-4squeeze14_amd64.deb 

dpkg -i libssl0.9.8_0.9.8o-4squeeze14_amd64.deb

 

 

Sous Ubuntu

sudo echo 'deb http://linux.dell.com/repo/community/ubuntu precise openmanage' sudo tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list

 

gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F && gpg -a --export 1285491434D8786F | sudo apt-key add - && sudoapt-get update

 

 sudo service dsm_om_connsvc start && sudo update-rc.d dsm_om_connsvc defaults

 

http://oitibs.com/dell-openmanage-on-ubuntu-12-04/

 


documentation:

 

Debian Jessie / Proxmox 4.x

 

echo 'deb http://linux.dell.com/repo/community/debian jessie openmanage' | tee -a /etc/apt/sources.list.d/linux.dell.com.sources.list

 

gpg --keyserver pool.sks-keyservers.net --recv-key 1285491434D8786F && gpg -a --export 1285491434D8786F | apt-key add - && apt-get update

 

apt-get install srvadmin-all

 

service dataeng start

service dsm_om_connsvc start

update-rc.d dsm_om_connsvc defaults

 

 howto05_small.pngVous en pensez quoi ?


 

 

 

 

Enrichissez Yakakliker en y contribuant vous aussi.

 

Cette page n'a encore aucun contenu. Enrichissez Yakakliker en y contribuant vous aussi.

FichierTailleDateAttaché par 
 libssl0.9.8_0.9.8o-4squeeze14_amd64.deb
Aucune description
978.45 Ko14:15, 29 Mai 2013franckActions
Images (0)
 
Commentaires (5)
Affichage de 5 commentaires sur 5: voir tout
http://packages.debian.org/squeeze/amd64/libssl0.9.8/download
Posté 14:15, 29 Mai 2013
11 Mars 2015 :

Installation validée sur les Dell T430
Posté 09:53, 11 Mar 2015
13 Mai 2015

Installation sur Dell Poweredge R530 OK
Posté 10:12, 13 Mai 2015
29 Juin 2016

Installation sur Dell Poweredge R730 / Proxmox 4.X OK
Posté 09:38, 29 Jun 2016
A partir de Proxmox 5 et stretch, il faut rajouter deux paquets en plus des paquets Jessie pour obtenir openmange 8.4 :

wget http://ftp.us.debian.org/debian/pool/main/o/openslp-dfsg/libslp1_1.2.1-10+deb8u1_amd64.deb
dpkg -i libslp1_1.2.1-10+deb8u1_amd64.deb
wget http://ftp.us.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.2l-1~bpo8+1_amd64.deb
dpkg -i libssl1.0.0_1.0.2l-1~bpo8+1_amd64.deb modifié 10:19, 19 Déc 2017
Posté 10:16, 19 Déc 2017
Affichage de 5 commentaires sur 5: voir tout
Vous devez être connecté pour poster un commentaire.